4 Channel BNC to Fiber Video Converter
Product Description
BNC to Fiber Video Converter Overview
Our 1-64 channel BNC to Fiber Video Converter
can simultaneously transmit 1-64 channels of 10-bit digitally encoded
broadcast quality video / return or bidirectional data / unidirectional
or bidirectional audio / Ethernet / Telephone / Switching value over one
multimode or singlemode optical fiber. These multiplexers are typically
used in applications where the cameras have P/T/Z capabilities. Plug
and Play design ensures the ease of installation and operation.
Electronic and optical adjustments are never required. LED indicators
are provided for instantly monitoring system status. Devices are
available for either standalone or rack-mount installation, which is
suitable for different working environment.
BNC to Fiber Video Converter Characterics
1.8-bit digitally encoded and non-compression broadcast quality video transmission
2. Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible PAL, NTSC and SECAM video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range, no Electrical or Optical Adjustments Required.
8. Special ASIC design.
9. Industry-grade of operating temperature from -20° C to 55° C, which is applied to the different working environment
10. Hot-swap function
11. We can offer rack-mounted chassis in standard 1U/2U/2.5U/4U.
BNC to Fiber Video Converter Applications
1. Intelligent Transportation System
2. Connection of Sub-network for Surveillance Center
3. Public Security Surveillance
4. High Way & Toll Station Surveillance
5. High Quality Video Conference
6. Industrial Closed Circuit Television Surveillance
7. Coliseum using for TV-live, audio transmission
BNC to Fiber Video Converter Specifications
|
VIDEO SPECIFICATIONS
|
|
Video interface number
|
1-64 channel video
|
|
Bandwidth of video
|
5MHz-8 MHz
|
|
Video input / output impedance
|
75 Ω(imbalance)
|
|
Differential gain
|
(10%-90%APL)DG <1% ( typical value)
|
|
Differential phase
|
(10%-90%APL)DP <0.7° ( typical value)
|
|
Automatic compatible video system
|
PAL SECAM NTSC
|
|
Weighted signal-to-noise ratio
|
S/N ≥ 70dB
|
|
AUDIO SPECIFICATIONS
|
|
Interface port
|
RJ-45 Lotus Block industrial standard port
|
|
Audio input / output impedance
|
600Ω (Balance/Imbalance)
|
|
Audio input / output voltage
|
2Vpp ( typical value)
|
|
Audio input / output level
|
0 dbm ( typical value)
|
|
Audio Bandwidth
|
10Hz~20kHz
|
|
Audio Digital Bandwidth
|
24 bit
|
|
Audio signal-to-noise ratio
|
S/N≥95dB (weighted)
|
|
DATA SPECIFICATIONS
|
|
InterfacePort
|
RJ-45 industrial standard port
|
|
Interface Signal Type
|
RS485/RS422/RS232/Manchester
|
|
Code rate
|
0~400Kbps
|
|
BER
|
≤ 10 -9
|
|
ETHERNET SPECIFICATIONS
|
|
InterfacePort
|
RJ45
|
|
Duplex
|
Full duplex/half duplex
|
|
Supporting agreements
|
IEEE802.3\10M\10/100M automatic negotiation
|
|
TELEPHONE SPECIFICATIONS
|
|
InterfacePort
|
RJ11
|
|
Bandwidth of telephone
|
8KHZ
|
|
Special functions
|
Support call-showing function;support H-F
|
|
Operating mode
|
Point-point hot line mode/program-controlled exchange mode
|
|
OTHER NORMAL SPECIFICATIONS
|
|
MTBF
|
≥ 10 5 hours
|
|
Storage Temperature
|
-40~ 85
|
|
Operating Temperature
|
-20 ~ 55
|
|
Humidity
|
0~95% non-condensing
|
|
Operating Voltage
|
Input:AC220v or DC-48V/24V ; Output:DC 5V/2A
|
|
OPTICAL SPECIFICATIONS
|
|
Fiber connector
|
FC /SC /ST
|
|
Transmission distance
|
0-100KM
|
|
Wavelength
|
1310/1550μm
|
|
EXTERNAL DIMENSIONS
|
Wall-link-type (stand alone)
|
1-channel Mini-type:11.1(L)×10.7(W)×2.8(H) cm
|
|
1-4 channel : 19.2(L)×17.3(W)×2.8(H) cm
|
|
5-8 channel : 19.2(L)×17.3(W)×5.6(H) cm
|
|
Rack-mount chassis Type
|
9-16 channel : 48.3(L)×18(W)×4.4(H) cm
|
|
2 Channel Fiber Optic Video Convert
